Start using Laravel 7.12.0 on Raspberry Pi3 (RPI3) via Pantahub

July 28, 2020

Note:Pantahub is the only place where Linux firmware can be shared and deployed for any device, You can signup @pantahub here:http://www.pantahub.com

Make your RPI3 device ready to deploy Laravel 7.12.0 by following 6 Steps

Step 1: Burn the RPI3 initial stable image into your sd card.

a) Download RPI3 image

Click to download

b) unxz the device image

Run $ unxz rpi3_initial_stable.img.xz

c) Burn image into sd card using Raspberry Pi Imager 1.2

Step 2: Boot your RPI3

a) Insert your sd card and supply the power

Step 3: Singup @pantahub here http://www.pantahub.com

Step 4: Download & Install a CLI tool “pvr”

Note: pvr is a CLI tool which can be used to interact with your device through pantahub platform. Note: Using pvr you can share your firmware and projects as simple as with a git tree: Note: Move the pvr binary to your bin folder after download.

Linux(AMD64): Download Linux(ARM32v6): Download Darwin(AMD64): Download

pvr clone; pvr commit; pvr post

To install from github source code:

$ go get gitlab.com/pantacor/pvr
$ go build -o ~/bin/pvr gitlab.com/pantacor/pvr

Note: You need “GOLANG” to be installed in your system for building pvr from github source code.

Step 5: Detect & Claim your device

a) Connect a LAN cable between your RPI3 & computer/Router.

b) Open your terminal & run $ pvr scan

c) Claim your device

$ pvr claim -c merely-regular-gorilla https://api.pantahub.com:443/devices/5f1b9c44e193a5000afa9901

d) Log into Panthub.com and check whether the newly claimed device appeared in the dashboard or not.

Step 6: Clone the device to your computer using the Clone URL of your device

$ pvr clone https://pvr.pantahub.com/sirinibin/presently_learning_pelican/0 presently_learning_pelican

Now your device is ready to deploy your Laravel 7.12.0 app

Deploy your Laravel 7.12.0 app to the device by following 5 Steps

Step 1: Move to device root dir

 `$ cd presently_learning_pelican`

Step 2: Add a new app “laravel” into the device

sirinibin/arm32v7-laravel-7.12.0:latest is a Docker image made for the devices with ARM32 architecture

You can customise the docker image for your custom Laravel app.

$ pvr app add laravel --from=sirinibin/arm32v7-laravel-7.12.0latest

Step 3: Deploy the changes to the device

$ pvr add .
$ pvr commit
$ pvr post

Step 4: Check the device status changes in Pantahub.com dashboard & wait for the status to become “DONE

Status 1: Status 2: Status 3: Status 4:

Step 5: Verify the “laravel” app deployment

Access the device IP: http://10.42.0.231 in your web browser.

You are done!